• Cofferdams for pipeline installation, rivers and stream diversions.
• Dewatering work sites during bridge repair, water and sewage intake and discharge systems for municipal water districts.
• Construction and repair of seawalls and groins.
• Levees, levee topping and flood water control.
• Temporary containment pond liner repairs.
• Silt containment and sediment collection.
• Erosion control through diversion or containment.

 

     The standard AquaDam® system is filled from one end only via the two inner tubes, which are longer than the rest of the dam. The extra length is required for coupling (attaching) one AquaDam® to another. The closed end is fitted with a collar that allows two AquaDams® to be linked together. Utilizing the coupling collars allows the AquaDams® to be attached end to end to meet the individual needs of the job site.

     An open-ended AquaDam® system can be filled or emptied from either end. This system is appropriate when placing a single AquaDam® entirely across a riverbed or canal where both ends can be extended up the bank. The ends elevation up the bank keeps the water from flowing out the open ends of the tubes. No fittings are necessary. Water-filled cofferdams are held in place by gravity. As long as the fill tube ends are higher than the AquaDam®, the water that creates the inside pressure will not be able to escape. 

The Product:
AquaDams® are available in a wide range of heights. Select the AquaDam® height below for your water retention applications:

    
     Additionally, AquaDams® may be ordered in custom sizes and lengths if required. The standard lengths are 50 and 100 feet. The lengths of the fill tubes and the coupling collar are not included in this measurement, but are provided at no extra charge. AquaDams® do not require fill ports, but they can be acquired separately.